Download CSI Perform-3D v6.0.0 - Design, analysis and evaluation of engineering structures

Hits: 5,942

Category: Software » Graphic » Engineering Design

CSI Perform 3D A special program with a special focus on seamless firewall design. Using this program, it is possible to analyze complex structures including shear structures in a nonlinear manner based on different degrees of resistance and deformation. The geometry of the model can be read from the SAP2000 or ETABS program. In the program, various types of elements can be used: beams, curtains, shear walls (with openings), slabs, dampers and separators. Non-linear analyzes can be done either statically or dynamically on a model. Loads can be applied at various stages to structures. For example, the dynamic load of an earthquake can be entered after a nonlinear static load. The program has powerful capabilities for design based on performance and can calculate the required capacity ratios for all components and for extreme states. Performance evaluation is performed automatically based on ATC-40, FEMA-356 and ATC-440.Macs are a timeline.

A key feature of the software CSI Perform 3D: 
modeling:
- Refreshing geometry model of the program SAP 2000 and ETABS 
- the Mac modeling with any number of elements 
- elements of linear and non-linear 
- ease of use of the graphics program 
- beam elements, columns and Brackets 
- Shear links and Panel Zone 
- Shear walls with pop 
- ups - Flush failures - 
Floor slabs 
- Fluid nozzles 
- Friction separators 
- Plastic joints with PMM interactions 
- P-Delta effects 
Non - linear analysis:
- Pushover static analysis 
- Three-dimensional non-linear time histories analysis 
- Use of fiber-reinforced sections for various materials
- Determination of nonlinear capacities based on deformation or resistance 
- Performing nonlinear dynamical analysis after nonlinear static analysis 
- Considering nonlinear static 
analysis of automatic analysis circles :
- Considering the power relation - the trilinear shift 
- in consideration Reducing hardness under cyclic loads 
- Calculating energy dissipation 
- Analyzing P-Delta 
- Loading from different earthquakes 
- Modifying the resistance of members without changing the model 
- Efficient 
performance analysis engine for large structures Performance based on evaluation:
- Nonlinear static analysis based on ATC- 40, FEMA-356-440 and ATC 
- limit states based on the deformation, deformation resistance or relative 
- relative Capacity / need 
- Calculate the ratio of capacity / need for multiple earthquakes
- Calculation of deformation or resistance capacities for various types of elements 
- Calculation of energy balance for energy loss of 
outputs:
- Drawing color charts of capacity / requirement ratios 
- Response charts for ATC-40, FEMA-356 and ATC-440 
- , Relative deformation and forces 
- View the history of the response forces for a group of elements 
- Bending and bending diagrams 
- Displaying force for a group of elements 
- View geometry deformed in motion 
- View animated 
mody forms 
- Hysteresis cycle diagrams - Charts Energy Balance

 

required system

Processor
- Minimum: Intel Pentium 4 or AMD Athlon 64 
- Recommended: Intel Core 2 Duo, AMD Athlon 64 X2, or better 
- A CPU that has SSE2 support is required 
- The analysis engine can use multi-core CPUs to run multiple analysis series in parallel 
Memory
- Minimum: 4 GB 
- Recommended: 4 GB for 32-bit O / S, 8 GB or more for 64-bit O / S 
- The problem size is significantly increased with more RAM 
Operation System
- Microsoft® Windows 7, Microsoft® Windows 8, or Microsoft® Windows 10, 32-bit and 64-bit versions 
- With the 64-bit operating system, the analysis engine can use more than 4 GB of RAM, making it possible to more efficiently. solve larger problems 
Disk Space
- 6 GB to install the software. 
- Recommended: 500GB or larger Hard Disk Drive (7200 rpm SATA) 
- Additional space required for running and storing model files and analyzing results, depending on the size of the 
video
. Minimum: Supporting 1024 by 768 resolution and 16 bits colors for standard (GDI +) graphics mode 
- For better graphics quality in terms of anti-aliasing and line thickness, device raster drawing capabilities should support legacy depth bias.

Specifications

Release new release report

Manufacturer: Computers and Structures, Inc 
File Size: 124 MB Release Date: 10:00 - 1395/10/5 | 12/25/2015 Source: PC Download / www.p30download.ir Rating: 

Installation guide

1. Install the software. 
2. Run the Keygen.exe file to create a file named lservrc. 
3. Copy the created file to the software installation location * and copy it to the default path.

C: \ Program Files (x86) \ Computers and Structures \ PERFORM-3D 6 \ PERFORM-3D 6 \ Program

* Software installation location: The installation location folder is usually located in the Windows drive and within the Program Files folder. You can also find the installation location in this way: 
- In Windows XP: After installation, right-click on the shortcut in the Start menu and click Properties, and then click Find Target. 
- In Windows 7: After installation, right-click on the shortcut in the Start menu and click on the Open file location option. 
- In Windows 8: After installation, right-click on the Shortcut on the Start Screen and click on the Open file location option, in the window that opens, right-click on the shortcut of the software and click Open file location click.
- On Windows 10: After installation, right-click Shortcut on the Start menu and click on the Open file location option, in the window that opens, right-click on the Shortcut software and click on the Open file location button. do.

download links

DownloadCrash ReportGuide

 Download - 124 MB

 Download Crack (Alone)

 Discuss this post

File password

www.p30download.com