·
Hits: 3,822
GeomCaliper
is an innovative tool that
facilitates measuring and checking the thickness of the walls of 3D CAD
models. This tool speeds up the design review process so that prototyping
and designing are quicker and thus dramatically reduces the time required for
the design process. Unlike other traditional methods of measurement, using
GeomCaliper easy method is fast and accurate and the Mac Eni has provided only a
few clicks areas of very thin or very thick in the design detected prior to the
introduction of models for reviews The final one corrects them.
Pro / Engineer version This tool can be installed for Pro / Engineer Wildfire or Creo Elements / Pro and PTC Creo Parametric.
Pro / Engineer version This tool can be installed for Pro / Engineer Wildfire or Creo Elements / Pro and PTC Creo Parametric.
Key features of GeomCaliper software :
- Measuring the thickness of the walls in CAD designs
- Reducing the time required in the design process
- Facilitating the examination of 3D models
- Providing precise and accurate results
- Easy to use
- and ...
- Measuring the thickness of the walls in CAD designs
- Reducing the time required in the design process
- Facilitating the examination of 3D models
- Providing precise and accurate results
- Easy to use
- and ...
GeomCaliper is
an innovative tool that facilitates measurement and checking of the wall
thickness of 3D CAD models. It accelerates the design review process for
manufacturability, enabling faster prototyping and production of designs, thus
reducing the overall design cycle time. Unlike other traditional
measurement methods, GeomCaliper is fast, accurate and easy to use.
GeomCaliper allows designers to
perform quick checks on their designs before it goes to engineering and
manufacturing for review. With the click of few buttons, designers can
identify the areas of design that are too thin or too thick
immediately. This saves lot of time. This helps in volume and weight
reduction which ultimately results in improved performance and significant cost
savings. The designers are guaranteed about quality of design.
More info (open / close)
required system
Supported
versions of Pro / ENGINEER
- On 32-bit OS, Pro / Engineer Wildfire 4.0 and Wildfire 5.0, Creo Elements / Pro, PTC Creo Parametric 1.0, 2.0, 3.0
- On 64-bit OS, Pro / Engineer Wildfire 4.0 (x64) (x64), 2.0 (x64), 3.0 (x64)
System Requirements
- Microsoft Windows XP Professional and Windows 7. All supported for both 32-bit and Wildfire 5.0 (x64), Creo Elements / Pro (x64), PTC Creo Parametric 1.0 (x64) and 64-bit.
- GeomCaliper requires 512 MB of RAM with 500 MB or more of free temp space. 1 GB of RAM with higher temp space is recommended for analysis of large parts
- On 32-bit OS, Pro / Engineer Wildfire 4.0 and Wildfire 5.0, Creo Elements / Pro, PTC Creo Parametric 1.0, 2.0, 3.0
- On 64-bit OS, Pro / Engineer Wildfire 4.0 (x64) (x64), 2.0 (x64), 3.0 (x64)
System Requirements
- Microsoft Windows XP Professional and Windows 7. All supported for both 32-bit and Wildfire 5.0 (x64), Creo Elements / Pro (x64), PTC Creo Parametric 1.0 (x64) and 64-bit.
- GeomCaliper requires 512 MB of RAM with 500 MB or more of free temp space. 1 GB of RAM with higher temp space is recommended for analysis of large parts
Specifications
Manufacturer: HCL Technologies
File Size: 54 + 57 MB Release Date: 10:07 - 1396/4/16 | 07/27/2017 Source: PC Download / www.p30download.ir Rating:
File Size: 54 + 57 MB Release Date: 10:07 - 1396/4/16 | 07/27/2017 Source: PC Download / www.p30download.ir Rating:
Installation guide
1- If the previous version of the
software is installed on your system, first uninstall it completely and then
install the new version.
2. Start the software installation.
2-1. Select a Pro / Engineer Wildfire or Creo Elements / Pro and PTC Creo Parametric version when installing the software for you. Otherwise GeomCaliper will be installed as a standalone program that does not have much performance.
2-2. At the end of the process, select the Configure Geometric GeomCaliper Pro / Engineer license option, and then click Finish.
3. Copy the Executable Executable folder in Crack at the software installation location (default path C: \ Program Files \ Geometric \ ProGeomCaliper)
4. Restart the system.
5. Run the installation path .. \ Executable \ GLM.exe.
5.1. In the Comfigure License section, select the Node Locked option. In the empty field, enter the following code and then click on Add. (This code is also included in the Read Me.txt file)
2. Start the software installation.
2-1. Select a Pro / Engineer Wildfire or Creo Elements / Pro and PTC Creo Parametric version when installing the software for you. Otherwise GeomCaliper will be installed as a standalone program that does not have much performance.
2-2. At the end of the process, select the Configure Geometric GeomCaliper Pro / Engineer license option, and then click Finish.
3. Copy the Executable Executable folder in Crack at the software installation location (default path C: \ Program Files \ Geometric \ ProGeomCaliper)
4. Restart the system.
5. Run the installation path .. \ Executable \ GLM.exe.
5.1. In the Comfigure License section, select the Node Locked option. In the empty field, enter the following code and then click on Add. (This code is also included in the Read Me.txt file)
gssl-GeomCaliperOnProE-05633-61408-39396-06400-21552-33792-40467-11168-60896-64968-13411-29082-41244-62381-46180-11830-20680-62953-49817-04432-54803-36006-46680-
35901-16857-04778-590
5-4. Wait until the configured
message is displayed successfully.
5-2. Check that the NODE-LOCK license must be displayed in the Configuration List field.
5-4. Close the GeomCaliper License Manager.
6. You can use GeomCaliper.
5-2. Check that the NODE-LOCK license must be displayed in the Configuration List field.
5-4. Close the GeomCaliper License Manager.
6. You can use GeomCaliper.
download links
File password
www.p30download.com
Dear Students, It's important to learn and earn experience
No comments:
Post a Comment