Download SANKOM Audytor OZC (HL) v6.1 - Building Modeling Software for Calculation of Thermal Load

Hits: 2,103

Category: Software » Graphic » Engineering Design , Educational » Engineering, Science & Knowledge

Heating load is defined as: The amount of heat required to compensate for the heat that is lost in the controlled atmosphere. According to the definitions, it can be seen that calculating the thermal load for designing, planning, and controlling heating and heating facilities in every part of the building is very important. 
Using the Audytor OZC software, you can calculate the heating load in each room to compute a 3D computer model of each packet environment, including the different areas of the building. This software can be used to calculate the amount of heat dissipation in each room, the heat lost for the whole building, the heat transfer coefficients for the walls, the floor, the ceiling / flat roofs, as well as the distribution of the thermal energy produced by a A heating system for an apartment is to be used.

The key features of the Audytor OZC software include:
- Calculation of heat dissipation in each room 
- Calculation of waste heat for the whole building 
- Including heat transfer coefficients for walls, floors, ceilings and flat roofs 
- Calculation of heat balance - Distribution of thermal energy generated by a heating system for an apartment 
- Creation of a graphic model of the building 
- Linear thermal 
bridges - Thermal (linear and point) thermal bridges in multi-layer partitions 
- Creation of a collectionnirmaan ke nirmaan mein nirmaan saamagree mein se ek

nirmaan ke nirmaan mein vibhaajan vibhaajan kee ek shrrnkhala ka nirmaan

- saamagree ke ek set ke saath ek riport banaen (moza Ù H Construction, building furniture, woodworking, radiators, manufacturers)
- Thermal load PN-EN 1283 
- Thermal load PN-B-03406 (outdated standard) 
- Selection of radiators 
- Humidity analysis of building partitions 
- and ...

    

ANKOM Audytor OZC is designed for 3D computer modeling of buildings, as well as for computer-aided calculations of heat load of individual rooms. 

The program calculates (depending on the language version):
- heat-transfer coefficients for walls, floors, roofs and flat roofs 
- heat losses for individual rooms 
- heat loss for the whole building 
- heat balance for the apartment heating period 
- radiator selection

Easy input of your design data into the computer.
User-friendly 3D design editor assists designers in efficient and fast data input. 

Easy computer modeling of floors of buildings
Thanks to the functionality of building base drawings, users can draw walls, windows, doors and floors without the requirement of precise manual dimensioning of all these components. Drawings from DWG files is possible of building base Import, bitmaps or Directly from scanning devices 

Correctness check of the model
After 3D computer models of buildings have been created, designers can perform Entered Correctness check of building partitions. 

Time saving
The concepts of data inheritance and default data will save users time and effort when entering individual building components. 

Option for fast modification of parameters.
Application of variables enables performing calculations. 

Preliminary selection of radiators
Already at the stage of designing buildings, designers can assess the required dimensions of radiators in heating systems. 

Assisting in the preparation of technical documentation.
Designers can prepare technical documentation for projects, based on extensive overviews of materials, building partitions and selected radiators. 

Program features
- Graphic design of a building model (show hardware requirements)     
- Connects and scales the drawing     
- Linear thermal bridges     
- Surfaces thermal bridges (linear and point) in 
multi-layered partitions     - Defines hygenic requirements for your own types of rooms     
- Creates a set of building materials in a building construction     
- Creates a set of building partitions in the building construction     
- Creates A report with a set of materials (building materials, building partitions, carpentry, radiators, manufacturers)     
- Heat load PN-EN 12831     
- Selects radiators     
- Interacting with the Audytor CH program family     
- Computing variables     
- Heat transfer coefficient PN-EN ISO 6946     
- Heat transfer through the ground PN-EN ISO 13370     
- Inhomogeneous partitions     
- The system default data inheritance     
- The data     
of the three-dimensional model     
of the building - Analysis of the building partitions Calculator of temperature distribution and vapor pressure     
- Heat load PN-B-03406 (an obsolete standard)

More info (open / close)

required system

The program runs under MS Windows (XP, Vista, 7, 8, 8.1) 32bit and 64 bit. 

The minimum hardware:
- 1200 MHz processor, 
- 1 GB RAM, 
- A color monitor with a minimum screen resolution of 1024x768, 
- 200 MB free space on the hard drive, 
- Compatible graphics card with OpenGL 2.0 and higher, 

All new graphics cards on the market should meet the minimum hardware requirements; Graphics card integrated with the motherboard: minimum GMA 500;

Specifications

Release new release report

Manufacturer: SANKOM 
File Size: 74.5 MB Release Date: 13:25 - 1396/6/17 | 08/28/2012 Source: PC Download / www.p30download.ir Rating: 

Installation guide

1. Disconnect the system from the Internet. 
2. Start the software installation. In the license transfer window, select 'I do not have the license ...'. 
3. Run the keygen.exe file. 
4. Go back to the license information window and select one of the options 'Telephone transfer' or 'Fax transfer' and click Next. Copy the license code displayed at the top of the window and enter it in Keygen and click Generate to create an activation key. 
5. Return to the software and copy the generated code by Keygen in the Return code field.

download links

DownloadCrash ReportGuide

 Download - 74.5 MB

 Download Crack (Alone)

 Discuss this post

File password

www.p30download.com