Hits: 3,828
·
Category: Software » Graphic » Engineering Design , Educational » Engineering, Science
& Knowledge
Software Cradle is one of the leading companies in the field of computing
fluid dynamics software(CFD), which has introduced advanced and high-end
products. ScSTREAM and HeatDesigner are two of the most famous software
companies that specialize in solving flow equations, analyzing and simulating
heat transfer and fluid dynamics phenomena. With a wide range of
capabilities, these two software programs help engineers at McAnike and Electronics
to do more accurate analyzes and simulate advanced and more sophisticated
prototypes. Performing the thermal and dynamic calculations before
producing actual parts has a very important effect on the performance of the
parts and their useful life and can prevent many of the damage caused by the
wrong design.
scSTREAM
is a thermal fluid
analysis software designed exclusively for systems with specific structural
mesh that follow a specific pattern. This software has been developed to
solve flow equations and thermal analyzes of designed samples. This
software uses several methods to design the samples, from drawing simple maps
to complex CAD-designed models in this software. Performing large-scale
computing, support for moving models and parametric studies are other features
of this software.
HeatDesigner is another name for this company, which is based on the scSTREAM software and is exclusively used for thermal analysis, especially in the electronic industry. With macThis software can simulate different mechanisms and phenomena of heat transfer in electrical circuits and other electronic systems, and has developed several solutions for cooling systems and reducing temperature in sensitive systems.
Key features of scSTREAM and HeatDesigner software:
- Solving flow equations, heat transfer and fluid dynamics
- Simulating and analyzing thermal fluids
- Designing very complex samples and performing their calculations
- Analyzing actual parts of components and optimizing them - Analyzing
thermal circuits of electrical circuits and other Electronic components
- Provide multiple solutions to reduce temperature in temperature sensitive systems
- Modify non-standard designs and achieve required properties
- Support most commonly used engineering software designs
- Advanced patterns for designing the desired specimens
HeatDesigner is another name for this company, which is based on the scSTREAM software and is exclusively used for thermal analysis, especially in the electronic industry. With macThis software can simulate different mechanisms and phenomena of heat transfer in electrical circuits and other electronic systems, and has developed several solutions for cooling systems and reducing temperature in sensitive systems.
Key features of scSTREAM and HeatDesigner software:
- Solving flow equations, heat transfer and fluid dynamics
- Simulating and analyzing thermal fluids
- Designing very complex samples and performing their calculations
- Analyzing actual parts of components and optimizing them - Analyzing
thermal circuits of electrical circuits and other Electronic components
- Provide multiple solutions to reduce temperature in temperature sensitive systems
- Modify non-standard designs and achieve required properties
- Support most commonly used engineering software designs
- Advanced patterns for designing the desired specimens
scSTREAM thermo-fluid software has been servicing
the electronics and architectural industries for thirty years. The
ever-evolving software is characterized by its overwhelmingly user-friendly
interfaces and high speed processing. HeatDesigner is based on scSTREAM and is specially
developed for thermal design of electronics products. HeatDesigner
provides physical functions necessary for thermal design with its simple
interfaces and powerful computing performance.
Program Structures:
Various methods to represent shapes
The shape of a model to be analyzed can be represented by using the following methods: voxel method (slanted faces and curved faces are represented in Staircase patterns), cut-cell method (the shape of a model created with a CAD tool can be represented more accurately), and the overset mesh method (a model of an arbitrary shape defined with unstructured mesh can be overlapped on a model defined with structured mesh to use the shape created with a CAD tool as is).
Large-scale calculation
In structured mesh, even a complex model does not need to be modified almost at all, and the shape or scale of a model does not affect the difficulty of mesh generation. In addition, Solver performs a calculation at a high speed in parallel computing and achieves effective processing as the speed increases depending on the number of subdomains.
Moving objects
A flow generated by a moving rigid object can be calculated. Conditions including the motion of an object (translation, rotation, and elastic deformation), heat generation / absorption, and air supply / return can be set. The model of a moving object is created by another mesh. In this way, the conditions such as the distance that the object moves are limited very little.
Parametric study
Parametric Study Tool is useful to apply multiple conditions to multiple parts and compare the analysis results. The tool automatically performs the calculation of the required number of times only by specifying a number of conditions and the parameters of the conditions. Multiple analyzes of the various conditions can be obtained easily by setting parameters at the early stage. In addition, the tool can reduce human errors, which tend to be caused when multiple models are created.
Multiblock
Mesh can be refined partially to represent a model more accurately and perform more calculations more efficiently.
Customizing variables
Complicated conditions including trigonometric functions and conditional branches such as IF statements can be set without compiling.
Part library
The shape and conditions of frequently used parts can be registered. Conditions include the allocation of position, material, and heat generation.
Various methods to represent shapes
The shape of a model to be analyzed can be represented by using the following methods: voxel method (slanted faces and curved faces are represented in Staircase patterns), cut-cell method (the shape of a model created with a CAD tool can be represented more accurately), and the overset mesh method (a model of an arbitrary shape defined with unstructured mesh can be overlapped on a model defined with structured mesh to use the shape created with a CAD tool as is).
Large-scale calculation
In structured mesh, even a complex model does not need to be modified almost at all, and the shape or scale of a model does not affect the difficulty of mesh generation. In addition, Solver performs a calculation at a high speed in parallel computing and achieves effective processing as the speed increases depending on the number of subdomains.
Moving objects
A flow generated by a moving rigid object can be calculated. Conditions including the motion of an object (translation, rotation, and elastic deformation), heat generation / absorption, and air supply / return can be set. The model of a moving object is created by another mesh. In this way, the conditions such as the distance that the object moves are limited very little.
Parametric study
Parametric Study Tool is useful to apply multiple conditions to multiple parts and compare the analysis results. The tool automatically performs the calculation of the required number of times only by specifying a number of conditions and the parameters of the conditions. Multiple analyzes of the various conditions can be obtained easily by setting parameters at the early stage. In addition, the tool can reduce human errors, which tend to be caused when multiple models are created.
Multiblock
Mesh can be refined partially to represent a model more accurately and perform more calculations more efficiently.
Customizing variables
Complicated conditions including trigonometric functions and conditional branches such as IF statements can be set without compiling.
Part library
The shape and conditions of frequently used parts can be registered. Conditions include the allocation of position, material, and heat generation.
More info (open / close)
required system
OS
(x64-only):
- Windows XP Professional
- Windows Vista Business / Ultimate / Enterprise
- Windows 7 Professional / Ultimate / Enterprise
- Windows 8 Pro / Enterprise
- Windows Server 2008
- Windows Server 2008 R2
- Windows Server 2012
Memory: 2GB; depends on number of mesh
HDDs: 3GB available disk space for installation
Other devices: Graphics card that supports OpenGL for Preprocessor / Postprocessor
- Windows XP Professional
- Windows Vista Business / Ultimate / Enterprise
- Windows 7 Professional / Ultimate / Enterprise
- Windows 8 Pro / Enterprise
- Windows Server 2008
- Windows Server 2008 R2
- Windows Server 2012
Memory: 2GB; depends on number of mesh
HDDs: 3GB available disk space for installation
Other devices: Graphics card that supports OpenGL for Preprocessor / Postprocessor
Specifications
Manufacturer: Software Cradle Co., Ltd.
Price: US $ 8,000 (for information only) File Size: 1782 MB Release Date: 00:45 - 1394/12/18 | 2016.03.08 Source: PC Download / www.p30download.ir Rating:
Price: US $ 8,000 (for information only) File Size: 1782 MB Release Date: 00:45 - 1394/12/18 | 2016.03.08 Source: PC Download / www.p30download.ir Rating:
Installation guide
1.Download the software first and
then unzip it.
2.Start the installation process by running the Setup.exe file.
3.Use the serial file in the Serial.exe file to install the software.
4.In the final stages of installation, the Settings page opens to complete them as needed.
5.After the main software installation is complete, the installation of the License Manager process is performed.
6.In Computer Type, select Server PC.
7.Next, give the software_cradle_SSQ.dat file address in the License folder.
8.Complete the FLEXlm Licensing installation process.
9.After installing the message "Restart the system", make sure to click "No" and do not restart the system.
10.The LMTools program, followed by the browser, opens to close both.
2.Start the installation process by running the Setup.exe file.
3.Use the serial file in the Serial.exe file to install the software.
4.In the final stages of installation, the Settings page opens to complete them as needed.
5.After the main software installation is complete, the installation of the License Manager process is performed.
6.In Computer Type, select Server PC.
7.Next, give the software_cradle_SSQ.dat file address in the License folder.
8.Complete the FLEXlm Licensing installation process.
9.After installing the message "Restart the system", make sure to click "No" and do not restart the system.
10.The LMTools program, followed by the browser, opens to close both.
11.Copy the contents of the License folder to the
location of the software that is the default C: \ Program Files \ Cradle.
12.Open the Drivers_net folder from the software installation location.
13Right-click on the Install_Cradle_SSQ.bat file and select Run as Administrator.
14.Go to C: \ Windows \ System32 \ drivers \ etc and open the HOSTS file with Notepad.
15.Add the following two lines to the end and save the file:
12.Open the Drivers_net folder from the software installation location.
13Right-click on the Install_Cradle_SSQ.bat file and select Run as Administrator.
14.Go to C: \ Windows \ System32 \ drivers \ etc and open the HOSTS file with Notepad.
15.Add the following two lines to the end and save the file:
127.0.0.1 cradle.co.jp
127.0.0.1 158.199.162.103
127.0.0.1 158.199.162.103
16. Restart your system once.
17.The software is fully functional and can be used without any restrictions.
Tips:
- This software is only installed on 64-bit systems.
- Preferably use Windows 7.
- It is best to copy the license file to the system first in a fixed path and then give it the software in step 7.
- It's best to interrupt your internet connection when working with the software.
- All files are compressed as much as possible and can be repaired with WinRAR software in case of incomplete downloads.
17.The software is fully functional and can be used without any restrictions.
Tips:
- This software is only installed on 64-bit systems.
- Preferably use Windows 7.
- It is best to copy the license file to the system first in a fixed path and then give it the software in step 7.
- It's best to interrupt your internet connection when working with the software.
- All files are compressed as much as possible and can be repaired with WinRAR software in case of incomplete downloads.
download links
File password
www.p30download.com
Dear Students, It's important to learn and earn experience
No comments:
Post a Comment