Download Battery Design Studio v11.04.012 x64 - Design, simulate and analyze battery types

Hits: 2,851

Category: Software » Graphic » Engineering Design

Battery Design Studio is a software tool for designing, simulating performance, and analyzing battery cell data that provides engineers and designers with a unique and advanced feature and feature. Using this software, you can design a variety of battery cells along with the finest details such as volume, weight, power density, and more. This software covers all stages from the design of the electrode to the chemical formulation and packaging of the product, and also, after completing the design stages, is able to put the model in normal condition and test it so that the amount It analyzes its performance and stability. Another key feature of this software is its function as a neutral environment for testing the types of cells and batteries in the same conditions that users of this MacIt gives you a look at various models of product development and development.

Key features of Battery Design Studio:
- Calculate important features of a cell design such as nominal capacity, open circuit voltage and total mass
- Use of electrode dimensions and electrochemical parameters 
- Measure basic parameters such as electrode porosity, active particle size and. .. 
 - loding ke dauraan sel kee ilektrokemikal pratikriyaon ka simuleshan

- kul dravyamaan ko kam karane ya sel kshamata mein sudhaar karane ke lie dijain anukoolan
- kshamata raiduchairs ya baitaree suvidhaon jaise sakriy saamagree, ilektrolait aur pata lagaane ...

sarkit modal banaenequivalent to collect responses to load and automatically record test results 
- the Mac transfer software project STAR-CCM + to complement or optimize 
- and ...

   

Battery Design Studio can be applied to all cell form factors (pouch, cylindrical and prismatic wound) and will consider all aspects of the design to initially compute the volume, weight, and power densities of designs. The comprehensive user interface walks the user to complete a cell model through the setup of their cell including electrode design, chemistry formulation, tabbing strategy, and external packaging.

Once a cell is created, this can be used to simulate performance over a given test cycle, confirming the models operation, or an appropriate drive or duty cycle to enable the cell's limiting factors to be understood. These can be identified by simulation output, highlighting the evolution of internal quantities, such as lithium concentration, across the electrode pairs within the cell. This understanding provides an insight into how a cell could be improved and a cost / benefit analysis conducted to understand if this is a 'good' solution. Uniquely, this cell model can be imported into STAR-CCM + using the Battery Simulation Module to enable a detailed battery, battery, and electrochemistry analysis of a battery pack using this cell model to be computed. For more information go to the STAR-CCM + 'add-ons' page.

Battery Design Studio® can also be used as a neutral environment to compare battery cell test work from various cycler manufacturers. The software contains converters for all popular cyclers, allowing data to be presented in a regular format showing all data. This also enables simulation data to be presented against cycler data and the software contains many specific tools for battery analysis, eg Voltage vs. DOD / SOC. 

Here are some key features of Battery Design Studio:
- Compute important attributes of new cell designs, such as nominal capacity, open circuit voltage or total mass, using electrode dimensions and electrochemistry parameters
- Understand the sensitivity of a defined cell to the manufacturing variability of the underlying parameters, e.g. variable electrode porosity or active particle size; 
- Simulate the cell electrochemistry response to a given load, whether power or current, and optimize a design to reduce the total Mass or improve the capacity of the cell 
- Understand and visualize the underlying phenomena that limit the rate capability or capacity of a cell design, which may be a limitation of the active material, electrolyte or current path. 
- Create equivalent circuit models that capture the response to load of a tested cell, by reading in test data and automatically regressing parameters to populate the circuit model
- Finally, a complete cell design which can then be passed to STAR-CCM + to represent the cell in a detailed three-dimensional model. It can also be multiplied to create a module or pack

More info (open / close)

required system

OS: Windows Vista / 7even / 8

Specifications

Release new release report

Manufacturer: CD-adapco 
File Size: 222.92 MB Release Date: 13:00 - 1395/6/26 | 16.1.2016 Source: PC Download / www.p30download.ir Rating:

Installation guide

1. Run the Setup file and install the Custom method during installation to continue installation and install FlexNET Publisher License Manager. 
Copy the contents of the Crack folder and replace the previous files in the software installation location. 
3. In the Start menu, search for the Environment variable and run it. 
6. Select the NEW key and create a variable with the following information and select OK at the end. 
variable name: CDLMD_LICENSE_FILE 
variable value: The cdlmd_SSQ.lic file is copied at the software installation location. 
* Software installation location: The installation location folder is usually located in the Windows drive and within the Program Files folder. You can also find the installation location by using this method:
- In Windows XP: After installation, right-click on the shortcut in the Start menu and click on the Properties option and then click Find Target. 
- In Windows 7: After installation, right-click on the shortcut in the Start menu and click on the Open file location option. 
- In Windows 8: After installation, right-click on the Shortcut on the Start Screen and click on the Open file location option, in the window that opens, right-click on the shortcut of the software and click Open file location click. 
- On Windows 10: After installation, right-click Shortcut on the Start menu and click on the Open file location option, in the window that opens, right-click on the Shortcut software and click on the Open file location button. do. 

download links

DownloadCrash ReportGuide

Download - 222.92 MB

 Download Crack (Alone)

 Discuss this post

File password www.p30download.com