Visit: 227
Fe-safe is part
of SIMULIA's simulation series designed and developed to reduce material
consumption to produce lighter, more robust, yet lifelike
components. Using this software, you can do a variety of durability tests such as creep and
fatigue in different environments on finite element models that were previously
designed by Abaqus. Using this software, you can reduce the cost of return
and warranty for commercial products, eliminate conceptual error errors, and
ultimately provide an optimized product for durability and production
costs. In fact, by optimizing the raw materials and determining the stress
concentration points, the creep and fatigue tests are automatically done and
saved in time for human resources.
This software is able to perform a variety of fusion multi-threaded analysis
with high precision regardless of the complexity of the designed
model. There are also modules that are used to test the fatigue of certain
materials, such as elastomers, structural welds and points. There are also
complex thermo - mechanical tests such as creep interaction and
fatigue on very sensitive models.
Key features of the fe-safe software:
- Reliable and precise multi-axial fatigue analysis.
- Exclusive elastomer fatigue analysis.
- Determination of stress concentration at point and structural points.
- Thermomechanical analysis and interactions of creep and fatigue tests.
- The most advanced testing simulator. Creep
- Ability to import models from other FEM software
- Compatibility with other SIMULIA family software
- Compatibility with Windows and Linux
Key features of the fe-safe software:
- Reliable and precise multi-axial fatigue analysis.
- Exclusive elastomer fatigue analysis.
- Determination of stress concentration at point and structural points.
- Thermomechanical analysis and interactions of creep and fatigue tests.
- The most advanced testing simulator. Creep
- Ability to import models from other FEM software
- Compatibility with other SIMULIA family software
- Compatibility with Windows and Linux
The fea-safe suite of software is the world-leading
technology for durability analysis from FEA, with direct interfacing to all
major FEA suites and its capabilities have been developed to meet the most
demanding industry applications. It was the first commercially available
fatigue analysis software to focus on modern multiaxial strain-based fatigue
methods and it continues to set benchmark for fatigue analysis software.
What's New in Fe-Safe
2017?
Characteristics:
- Fatigue of welded joints
- Vibration fatigue
- Test program validation
- Critical distance methods for crack growth prediction
- Property mapping for casting or forging simulations
- Warranty curves combine variations in material fatigue strengths and variability in loading to calculate the survival probability over A range of service lives.
- The performance of the process of forming or assembling the process for estimating residual stresses for the rapid sensitivity analysis.
- The virtual strain gauges can be specified in a feasible way to correlate with measured data.
- Signal processing, load history manipulation, fatigue from strain gauges, and generation of accelerated testing signals are among the many features included as standard. - Improve correlation between test and analysis within a single user interface
- fe-safe can be run within an optimization loop to allow designs to be optimized for fatigue performance. fe-safe interfaces to Isight and TOSCA from SIMULIA.
- Coupling between SIMPACK Flex bodies, Abaqus, and fe-safe.
- Interfaces to Abaqus ODB, ANSYS RST, and NASTRAN OP2 files.
Benefits:
- Increase the fatigue life of safety critical components
- Reduce product recalls and warranty costs.
- Optimize and validate design and test programs.
- Reduce prototype test times
- Speed up analysis times, thus reducing man-time hours
- Increase confidence that product designs pass physical test schedules as "right-first-time"
- Reduce reliance on physical testing
Characteristics:
- Fatigue of welded joints
- Vibration fatigue
- Test program validation
- Critical distance methods for crack growth prediction
- Property mapping for casting or forging simulations
- Warranty curves combine variations in material fatigue strengths and variability in loading to calculate the survival probability over A range of service lives.
- The performance of the process of forming or assembling the process for estimating residual stresses for the rapid sensitivity analysis.
- The virtual strain gauges can be specified in a feasible way to correlate with measured data.
- Signal processing, load history manipulation, fatigue from strain gauges, and generation of accelerated testing signals are among the many features included as standard. - Improve correlation between test and analysis within a single user interface
- fe-safe can be run within an optimization loop to allow designs to be optimized for fatigue performance. fe-safe interfaces to Isight and TOSCA from SIMULIA.
- Coupling between SIMPACK Flex bodies, Abaqus, and fe-safe.
- Interfaces to Abaqus ODB, ANSYS RST, and NASTRAN OP2 files.
Benefits:
- Increase the fatigue life of safety critical components
- Reduce product recalls and warranty costs.
- Optimize and validate design and test programs.
- Reduce prototype test times
- Speed up analysis times, thus reducing man-time hours
- Increase confidence that product designs pass physical test schedules as "right-first-time"
- Reduce reliance on physical testing
More info (open / close)
required system
Fe-Safe 2017 Test Configurations:
- Windows 10 Enterprise 64-bit (Build 10240) / Windows 8.1 Enterprise 64-bit (Build 9600)
- Intel (R) Xeon (R) CPU E5-1620 @ 3.60GHz
- 16384 MB RAM
- AMD Radeon (TM) Pro WX 9100
- 1920 x 1080; 32-bit color
- Windows 10 Enterprise 64-bit (Build 10240) / Windows 8.1 Enterprise 64-bit (Build 9600)
- Intel (R) Xeon (R) CPU E5-1620 @ 3.60GHz
- 16384 MB RAM
- AMD Radeon (TM) Pro WX 9100
- 1920 x 1080; 32-bit color
Specifications
Manufacturer: Dassault Systèmes
Price: $ 8945 (for information only) File Size: 770 + 815 MB Release Date: 00:00 - 1396/10/11 | 2018.01.01 Source: PC Download / www.p30download.ir Rating:
Price: $ 8945 (for information only) File Size: 770 + 815 MB Release Date: 00:00 - 1396/10/11 | 2018.01.01 Source: PC Download / www.p30download.ir Rating:
Installation guide
1. Download the software first and
then unzip.
2. Enter the crack directory.
3. Right-click the server_install.bat file and click Run as Administrator.
4. Run the Setup.exe file with Administrator access and start the installation process.
5. In the License Server Configuration step, select SIMULIA FLEXNet.
6. In the next window in the License Server section 1, enter 27011 @ localhost (first enter 27011 then the @ then localhost).
7. Complete the software installation process.
8. The software is fully functional and can be used without any restrictions.
9. You may also install the Software Documentation if you wish.
Tips:
- This application is completely tested.
- This software is only installed on 64-bit systems.
- This software is only installed on Windows 8.1, Windows 10, and Linux.
- The HF2 update is automatically installed with the original software and does not require separate installation.
- To install the Linux version, follow the Readme.txt file guide.
- Documentation package is placed separately.
- All files are compressed as far as possible and can be repaired by WinRAR.
2. Enter the crack directory.
3. Right-click the server_install.bat file and click Run as Administrator.
4. Run the Setup.exe file with Administrator access and start the installation process.
5. In the License Server Configuration step, select SIMULIA FLEXNet.
6. In the next window in the License Server section 1, enter 27011 @ localhost (first enter 27011 then the @ then localhost).
7. Complete the software installation process.
8. The software is fully functional and can be used without any restrictions.
9. You may also install the Software Documentation if you wish.
Tips:
- This application is completely tested.
- This software is only installed on 64-bit systems.
- This software is only installed on Windows 8.1, Windows 10, and Linux.
- The HF2 update is automatically installed with the original software and does not require separate installation.
- To install the Linux version, follow the Readme.txt file guide.
- Documentation package is placed separately.
- All files are compressed as far as possible and can be repaired by WinRAR.
download links
File password www.p30download.com
No comments:
Post a Comment