Description
Synopsys HSPICE is a very powerful software in the field of electronic circuit simulation and has up-to-date algorithms for simulating and analyzing MOS components. Synopsys HSPICE is used to analyze basic electronic circuits such as transistors and does not involve electronic components such as microcontrollers. This software has a lot of power in simulating and correcting its output data in testing and analyzing various electronic circuits. Synopsys HSPICE software is an accurate and valid simulator for simulating and analyzing different parts of the circuit, managing the power consumption of its components, testing the performance of elements and creating drawings and design documents.
Features of Synopsys HSPICE software:
- Having a large volume of proprietary and industrial simulated models
- Provide standard tools for accurate simulation of electronic circuits
- Very high power in simulation and testing of parts
- Has a powerful and effective mechanism to define the effect of trend changes
- A very good solution for designing amplifiers and sound modifiers
- Analysis of the working process of devices in the process of time and depreciation
- Provide highly accurate output data from test results and circuit analysis
- Efficient statistical simulation of the effects of mismatch of local parameters
- Very high speed in performing multiple analyzes
- Comprehensive analysis of designed parts, boards and parts
- Realistic simulation and processing of various circuits and components
required system
Minimum Hardware
Core 2 CPU
2GB RAM
1GB available disk space
Recommended Hardware
Best in market CPU (multi-core, 64-bit)
4+GB RAM
10GB available disk space
Supported Operating Systems
Windows 10
Windows 8
Windows 7
تصاویر Synopsys HSPICE
Installation guide
Synopsys HSPICE 2019 (the installation method for other Synopsys products is the same, only the software address changes; for example, for Saber software, the address C: \ synopsys \ Saber64 \ P-2019.06 must be used)
0. First make sure that your
computer is connected to the Internet only through a network card (and
preferably Ethernet) and that your antivirus is disabled.
1.
After extracting the installation files, run the hspice installation
file and install the program in the default location. At the end of the
installation, select the "manually reboot later" option and click
finish
2. Go to the Crack folder, run the SCL_v2018 installation file in Run As
Administrator mode, do not change the displayed values and just click
Next and at the end finish
3. Run the LicGen.exe file, click on open and select and open the
displayed Synopsys.lpd file, from the Select Host ID section, select the
Ethernet option.
4. Open the folder C: \ synopsys \ SCL \ 2018.06-SP1 \ win32 \ bin (the
installed SCL version may be different, just go to C: \ synopsys \ SCL
and proceed the rest of the way according to your version), Hold down
the shift key and right-click on the snpslmd.exe file and select Copy as
Path.
5. Go to the Crack folder again, open the Synopsys.src file with
Notepad, delete the # symbol at the beginning of the first line, and
select the phrase home / EDA / Synopsys / scl_v2018.06 / linux64 / bin /
snpslmd /, Right-click and paste, delete the two symbols at the
beginning and end of the phrase as well (the first line should look like
this: DAEMON snpslmd C: \ synopsys \ SCL \ 2018.06-SP1 \ win32 \ bin \
snpslmd.exe )
6. From
the Edit menu, select Replace, type 2020- in Find What and 2030 in
Replace With, and click Replace All (check that the dates in the file
change to December 30, 2030). Found). Save and close the file.
7. Run the scl_keygen.exe file, in the NOTICE section, enter your
username instead of the phrase student @ eetop, in the EXPIRE section,
change the date to December 30, 2030, and in the HOST Name section, the
full name of your computer. Enter (to find this name, you can go to this
PC, right-click on an empty space and click Properties)
8. From the FlexLm License Generator window that you opened in step 3,
in the Select Host ID section, select the custom option and select and
copy the phrase that appears in front of it, and close this window, go
to the Synopsys License Generator window. (Which you opened in the
previous step) Go back and replace the copied phrase with HOST ID Daemon
9. Click Generate and wait for the text to be displayed in the License section, then close this window.
10. Copy the Synopsys.dat and fix.bat files from the crack folder,
create a folder called temp in the root of drive C, and copy these files
there
11. Run CMD in Run As Administrator mode, enter the command cd C: \ temp
and enter it, then enter the command fix.bat Synopsys.dat and enter it
and wait for the job to be done and close CMD
12. Copy the Synopsys.dat file to the temp folder and copy it to C: \ synopsys \ SCL \ 2018.06-SP1
13. Go to the Crack folder again, copy the 4 files pubkey_verify,
pubkey_verify.exe, synopsys_checksum, synopsys_checksum.exe and paste
them in the following paths:
C:\synopsys\SCL\2018.06-SP1
C:\synopsys\Hspice_P-2019.06-SP1-1
14.
Run CMD again in Run As Administrator mode, enter the cd command C: \
synopsys \ Hspice_P-2019.06-SP1-1 and enter it, then run the two
commands pubkey_verify.exe -y and synopsys_checksum.exe -y Enter the
order and enter and wait for the job to be done. Then enter the command
cd C: \ synopsys \ SCL \ 2018.06-SP1 and enter it again and enter the
two commands pubkey_verify.exe -y and synopsys_checksum.exe -y
respectively and enter and wait for the job to be done. Close the CMD
15.
Go to C: \ synopsys \ SCL \ 2018.06-SP1 \ win32 \ bin and open
lmtools.exe. Check the LMTOOLS ignores license file path environment
variables option, go to the Config Services tab, and enter Synopsys
instead of Service Name.
16.
In the path to lmgrd section, click the browse option and select the
lmgrd.exe file. In the path to license file section, click the browse
option, go to C: \ synopsys \ SCL \ 2018.06-SP1, click on license files
(*. Lic) in the lower right and click license files (*. Dat) Click, then
select and open the Synopsys.dat file that appears. In the path to
debug log file section, instead of the phrase C: \ ProgramData \
FNP_DIR, replace the phrase C: \ synopsys \ SCL \ 2018.06-SP1 (it should
look like this: C: \ synopsys \ SCL \ 2018.06-SP1 \ debug.log)
17.
Check the use Sevices and Start Server at Power Up options and click
save service (then click yes and ok), go to the start / stop / reread
tab, check the force server shutdown option and then click stop server
click. Wait for the job to be done, then click on the start server and
then on the ReRead License File
18.
Go to this PC, right click on the empty space and click Properties,
then advanced System setting and then environment variables. In both
user variables and system variables, click new, instead of name
SNPSLMD_LICENSE_FILE, and instead of value,
27000@Computer_Name
Enter where your computer's name should be instead of Computer_Name. Click ok
19.
From the Start menu, run the hspui P-2019.06-SP1-1 software, select the
open option from the File menu and go to C: \ synopsys \
Hspice_P-2019.06-SP1-1 \ Demo \ hspice \ bjt Select the bjtbeta.sp file
and open it, click simulate and then select the edit log file option
from the edit menu. It is observed that the warning not to connect to
the license server is displayed. Close the application
20.
From the Start menu, search for Services and open them. Find the
Synopsys service, right-click on it and click properties, set the
Startup type option to Automatic, and from the Recovery tab, change the
value in the Reset fail Count after to 1000 and click Apply. Go back to
the General tab and click stop and then ok
21.
Go to C: \ synopsys \ SCL \ 2018.06-SP1 \ win32 \ bin and open
lmtools.exe. Go to the start / stop / reread tab, check the force
server shutdown option, and then click stop server. Wait for the job to
be done, then click start server and then ReRead License File and close
lmtools
22. Go to C: \
synopsys \ SCL \ 2018.06-SP1, open the Synopsys.dat file with notepad
and the phrase in the (probably) 8th line (DAEMON snpslmd C: \ synopsys \
SCL \ 2018.06-SP1 \ win32 \ clear bin \ snpslmd.exe) (make sure no
blank line is left). Save and close the file
23.
Go to C: \ synopsys \ SCL \ 2018.06-SP1 \ win32 \ bin and open
lmtools.exe. Go to the start / stop / reread tab, check the force
server shutdown option, and then click stop server. Wait for the job to
be done. Then click on start server
24. Run the task manager, find Flexera Software LLC (32 bit) from the
backgrond processes section, right-click and click end task, close Task
manager
25. Go back to
lmtools and click on start server. Go to the config service tab, click
view log and then click close log. Go to the start / stop / reread tab
and click on the ReRead License File
26.
Now run the hspui P-2019.06-SP1-1 software again from the Start menu,
select the open option from the file menu and go to C: \ synopsys \
Hspice_P-2019.06-SP1-1 \ Demo \ hspice Go to \ bjt and select and open
the bjtgm.sp file, click simulate and then select the edit log file
option from the edit menu. It can be seen that the simulation has been
done and at the end of the file, the phrase ***** job concluded is
mentioned
The video tutorial of
the mentioned steps is also below. If the software crack fails after
restarting the computer, open Hspice, then open lmtools and click ReRead
License File. Run both hspice and lmtools as Run as Administrator.
Synopsys HSPICE 2016
After installing the program, use the crack and keygen that came with the program to crack it.
Linux installation guide: (by Mr. Haji Ghasemi)
To install HSpace under Linux,
first download and extract synopsys installer 3.3. You see a file with
the run extension. Allow it to run:
Open a terminal and go to that folder then type:
chmod +x Synopsys????.run
Because the file name is long, am I ??? I let you complete or rename it.
Create a folder in your home folder, such as my-synopsys
Type now:
Synopsys????.run/.
It asks you for the folder address. Type: (Suppose the username is Arman)
home/arman/my-synopsys/
Now run the file and create several files in the my-synopsys folder
Navigate to the my-synopsys folder.
If your Linux is fedora or ubuntu, you must first install tcsh to type in fedora in the terminal:
dnf install tcsh
Now you have to type:
PATH=/home/arman/my-synopsys:$PATH
export PATH
Now extract the rest of the hspice files and cut the .spf file and copy it to my-synopsys.
Now let the setup.sh file in the my-synopsys folder run (chmod)
If you are Ruth, get out of Ruth
type:
setup.sh/.
Click next in the window that opens. Tick the left side of the spice. Type the address of the installation location
Version P-2019.06-SP1-1 was installed and successfully activated on Windows 10, 64-bit version, on February 12, 1999.
download link
Download Synopsys HSPICE P-2019.06-SP1-1 Win
Synopsys Saber P-2019.06
Download the video tutorial for activating the 2019 version by one of the users
Download Synopsys_HSPICE_L-2016.06-SP1_Win
Download Synopsys_HSPICE_L-2016.06-SP1_Linux
Download Synopsys_HSPICE J-2014.09-SP2-2
Download Synopsys CosmosScope J-2015.03
Download Synopsys Installer 3.3 Linux
دانلود Synopsys HSPICE_Linux Fixed & Full Readme
File password (s): www.downloadly.ir
Size
560 MB / 2 GB
Dear Students, It's important to learn and earn experience
No comments:
Post a Comment